Mini Silent Dental Oil Less Air Compressor
|1-9 10-49 50-99 100+|
|FOB Unit Price:||US $200 US $180 US $150 US $120|
|Purchase Qty. (Pieces)||FOB Unit Price|
|Production Capacity:||3, 00PCS/Month|
|Payment Terms:||T/T, Western Union, Paypal, Money Gram|
- Model NO.: compressor 1
- Supply Voltage: 220V
- Pressure: 0.45-0.8MPa
- Air Container Volume: 30L
- Trademark: DTS
- Origin: Guangdong
- Brand: Dts Dental
- Power: 550W
- Discharge Capacity: 70L/Min
- Noise: 60dB
- Transport Package: Standard Export Carton
1,Main air container adopt Automotive paint process, High temperature resistant, Anti corrosion, long lift time span, beautiful appearance.
2,Special power switch setting, Overcurrent protection device, protect from over voltage and over current.
3,Low noise,slight vibration, provide a quiet and convenient environment
With the features of low noise, energy-saving, environmental protection and used securely, this machine is widely used in the filds of medical, sanitation, foodstuff, scientific testing and so forth.
|NO.||Trouble symptoms||Trouble analysis||Remedy|
|1||The compressor fails to work,the motor does not buzz normally||There is on power in the socket or the power switch is not turned on.||Turn on the power.|
|The pressure controller is not connected||Check the wiring of hte pressure controller|
|2||The compressor stops before the maximum pressure in reached||The set value of the pressure switch is low||Adjust the settings to the required value .|
|3||The machine fails to start normally,the compressor does not run,or runs a moment and stops itself,the motor buzzes.||The voltage is too low||1.Use a voltage stabilizer. |
2.Wait for the voltage to become normal before strat to use.
|More trouble||Contact the manufacturer|
|4||The compressor can work continually,but the pressure can't reach the maximum value or the time maintaining the maximum value in increased.||The Engraving Machine or the pipeline leaks air||Check each joint(soap water may be used) for any air leakage|
|Compressor head trouble||Contact the manufacturer|
|5||The air pressure in decreased after the machine stops.||Air leaks from joint of the air reservoir||Add adhesive,tighten joint.|
|Reverse air leakage from the unsealed check value|
1.Wash and clean the value core,or replace it.
2.Replace the spring or check the value.
|The compressor does not stop when the maximum pressure setting in exceeded.||Pressure controller trouble||Adjust or replace the pressure controller.|
|7||The safety value releases air within the compressor's working pressure range.||The spring force of the safety value is weak,the adjustable nut is loose.||Adjust the safety value adjusting nut to the position where the safety value release air under working pressure,then lock the nut.|